NeeCoo Me2 Bluetooth V4.0 dual SIM Nano card adapter for iOS devices.
1. Makes your for iPhone support dual SIM cards, also can make your for iPad/iTouch achieve call function.
2. 4 mm Ultra-thin high strength aluminium alloy frame, easy to carry.
3. Bluetooth 4.0&3.0 phone camera remote control shutter.
4. Anti-lost alarm function, reduce the risk of loss.
5. Support IOS, for iPhone/iPad/iPod/iTouch (Highest support for IOS11.02)
1. Please ensure that the SIM card inserted into the device and not a telecom CDMA card.
2. Please confirm the local support for GSM network and signal strength.
3. Please confirm that the operation is starting up after inserting the SIM card, otherwise please restart the device.
4. If APP refresh is not timely, you can restart the APP
5. Disconnect and re-pair, it's may cause the SIM card to register for a long time if the operator signal is weak.
6. Make sure that the Nano card has no burrs when you cut it to prevent poor contact, and damage the SIM card holder after multiple insertions and removals.
7. If the empty card tray is forcibly pulled out when inserted, it will easily damage the SIM card holder. If it is inserted in the reverse direction, please put the SIM card into the card tray and it can be removed normally.
8. If the above does not solve the problem, please contact customer service.
It's a smart Bluetooth gadget, connecting to mobile phone with dedicated APP, it enables single SIM card mobile to be dual SIM, for phone call and SMS operations.
Bluetooth: Dual Bluetooth 3.0&4.0
SIM card: For Nano SIM
Bluetooth distance: 10m, 360 degree
Holding time: About 4 hours
Standby time: 72 Hours
Working current: 100mA
Standby current: 12mA
Net weight: 31.8g
Packing size: 127.3x95.7x21.2mm
Type in "morecard" in App Store, and search for App to install in your devices.
Phone Call & SMS
App contains call (embed with keypad), contacts and messages UI. You can select each UI for phone call & SMS operations.
App does not support contacts edit, please go to for iPhone’s contacts to edit.
Remote Camera Shutter
How to enter remote camera shot:
A. Connect APP PHONE for iPhone and within working range.
B. Go to APP's settings -Camera, open camera window.
C. Use single press camera shutter to take photo.
D. Do not support video shot operation.
Connect for iPhone & Disconnect Alarm
After insert micro SIM card and Bluetooth pairing, you can go to the APP setting menu to check the connecting status. When distance is beyond the working range (10m), APP PHONE will beep to alert.
To remind you take care of your Phone.
1. It supports GSM network, MS does not support CDMA.
2. For CDMA users, you can insert CDMA SIM to your CDMA mobile, and then insert another GSM SIM to this APP PHONE.
3. Network data service is not supported.
1 x SIM Card Adapter
1 x Card Pin
1 x Card Holder
1 x Charging Cable
1 x English User Manual